Smart Structure Building Sand Washer For Washing And Screening Materials

1. Reasonable structure. The impeller drive bearing is isolated from water and materials buried in washer, which greatly avoid the bearing damaged because of soaking in water,sand and other pollutants.

2. Extremely rare lost of medium and fine sand, the grading and fineness module of washed building sand have achieved two national standards” sand for building” and” cobble and gravel for building”.

3. Almost no wear parts except for the sieve mesh of sand washer.

XS bucket-typed Sand Washer is a new type structure washing machine combined with sand industry situations and practical experience for many years. The machine is widely used in washing works of aggregate, which improve sand quality after deducted mixed stone powder and sundry.

Features

1. Smart structure, the gearing of bucket-wheel is above the water avoid destruction of water and sand mud.
2. Rotation of sand washer is stable,It can be controlled by adjustment of fine sand and stone powder loss, which reach good performance.
3. High quality of sand, high capacity, low consumption of power, and convenient maintenance.

Working Principle

Materials are fed evenly from the feeding box. Fill the buddle with certain amount of water continuously. The driving unit drives the helical shaft run at the certain speed, which will force the materials to overturn and roll in the buddle and move towards the discharge end. The fine grains of materials and impurity will be drain out through the overflow weir, while the coarse grains will be discharged through the discharge outlet. In this way, materials can be washed, classified, purified and dehydrated.